Home › Case studies › Parcel Handling & Sortation Conveyor System
Case study

Parcel Handling & Sortation Conveyor System

Complete controls, electrical installation and commissioning for a high-throughput parcel handling conveyor system.

SectorLogistics / distribution
SolutionParcel conveying & sortation
DeliveryHardware & software engineering · Control panel manufacture · Electrical site installation · Drive & powered roller integration · PLC, HMI & safety controls · Commissioning & handover
System layout for the logistics conveyor installation, showing the main conveyor routes, induct areas and sortation fingers.
System layout for the logistics conveyor installation, showing the main conveyor routes, induct areas and sortation fingers.

Project Overview

DACS delivered the electrical control and automation package for a conveyor system at a logistics facility. The system was designed to move and manage parcels through multiple induct, takeaway and sortation areas, combining conventional conveyor drives with 24VDC powered rollers and local operator controls.

The installation comprised 43 inverter-controlled conveyor drives and 146 24VDC rollers, supported by photocells, operator stations, lane alarms, emergency stops and pull-cord safety devices. The control architecture was based around a Siemens fail-safe PLC with distributed remote I/O and Profinet communications.

System Scale

43 Conveyor drives / motor isolators
146 24VDC rollers
22 Photocell sensors
48 Operator pushbutton stations
42 Emergency stop / pull-cord stations
12 Plug & socket arrangements for induct / takeaway units

The Challenge

A logistics conveyor system of this type has to combine reliable parcel flow with straightforward operator interaction and a carefully zoned safety philosophy. The controls also needed to integrate with the site high-level architecture, provide clear diagnostics and support rapid fault finding to minimise operational downtime.

DACS Solution

Control System & Panel Manufacture

DACS engineered and manufactured the main control cabinet housing the PLC, HMI, electrical distribution, inverter drives and general control equipment. Remote I/O boxes were used around the conveyor system to provide local standard and safety I/O for the individual sortation fingers.

The controls platform used a Siemens S7-1515F-2PN fail-safe PLC with ET200SP distributed I/O connected over Profinet. A CP1543-1 communications module provided the interface to the site high-level architecture.

Main conveyor control cabinet arrangement

Conveyor Drive Control

The conveyor motors were controlled using Siemens G120C panel-mounted inverters connected to the PLC over Profinet. Local motor isolators were installed to provide safe lock-off at each drive. A Siemens SENTRON power meter was also incorporated to monitor supply conditions and power consumption.

Parcel Flow & Operator Control

The conveyor controls were developed around the needs of a busy logistics operation. Induct stations allowed operators to start and stop local conveyors and select automatic or manual operation. In automatic mode, photocells monitored parcel flow and could stop the station when a blockage remained present for a configurable period.

Takeaway stations provided local start/stop control for parcel-bin loading, while dedicated slow-down controls were positioned along the sortation fingers. These allowed operators to temporarily reduce the upstream conveyor flow when required, with repeated activations escalating to a system stop for investigation. Lane beacons and audible alarms provided clear local indication, with events also recorded on the HMI.

Local operator slow-down control

Product Detection & Energy Management

Photocells were positioned throughout the system to manage parcel movement and conveyor sequencing. The same detection infrastructure was used to support a configurable sleep mode, allowing conveyor sections to respond when product had not been detected for a defined period.

Machine Safety

Safety was integrated into the conveyor controls using the fail-safe PLC and distributed safety I/O. Eight emergency-stop pushbutton stations and 34 emergency-stop pull-cord stations were distributed around the system to provide accessible stopping points for operators.

The safety architecture was divided into zones so that the response to an emergency-stop demand could be matched to the affected conveyor area. The use of a safety PLC also allowed the zone logic to be adapted during commissioning and handover if the final operational requirements changed.

Conveyor safety zoning philosophy diagram

24VDC Roller Integration

The conveyor system incorporated 146 Interroll 24VDC rollers. DACS integrated the roller power supplies, controllers and roller equipment into the electrical design, completed the field wiring and commissioned the equipment as part of the overall conveyor controls package.

24VDC roller, controller and power-supply equipment

HMI, Diagnostics & Remote Support

A Siemens TP2200 Comfort 22-inch colour touch HMI provided the main operator and maintenance interface. PLC feedback and system faults were presented graphically, with the conveyor layout directing maintenance personnel to the location of a fault and identifying the affected device.

The controls also incorporated a Siemens UPS1100/UPS1600 backup arrangement for the 24VDC control system and an eWON remote-access device for PLC support. An interface to the building fire-alarm system was included so that a fire signal would initiate a controlled shutdown of the conveyor system.

Siemens TP2200 Comfort HMI diagnostics interface

DACS Scope of Supply

  • Project management and hardware engineering
  • PLC and safety software engineering
  • Control panel manufacture
  • Electrical site installation
  • Siemens S7-1500F PLC and ET200SP safety remote I/O
  • Siemens G120C inverter integration
  • Operator stations, emergency stops and pull-cord safety equipment
  • 24VDC roller wiring and integration
  • HMI development and fault diagnostics
  • Fire-alarm and high-level system interfaces
  • Commissioning and handover documentation

The Result

The completed system provided the customer with an integrated conveyor-control solution for parcel movement, induction and sortation across the logistics operation. The project brought together motor control, 24VDC roller technology, distributed I/O, operator controls, machine safety, diagnostics and site interfaces within one coordinated automation package.

For DACS, the project demonstrates our ability to deliver complete electrical and controls packages for logistics and distribution conveyor systems - from electrical hardware design and panel manufacture through to site installation, PLC/HMI software and commissioning.

Explore the related capability →

Let’s discuss your next project.

A new installation, an upgrade or a defined electrical package. Talk to DACS about the support you need.

Talk to our team ↗